Perencanaan Strategi Untuk Mengurangi Produk Reject Dengan Pendekatan Lean Manufacturing
DOI:
https://doi.org/10.32534/jv.v19i3.5923Abstract
Company X, a feed manufacturer, faced a significant challenge related to a high product rejection rate of 10%. This study aimed to identify the root causes of the problem and implement lean manufacturing-based solutions to reduce waste. Through fishbone and Pareto analysis, the study revealed that human errors and non-standard measuring instruments were the primary contributors to the issue. The PDCA cycle was utilized as a framework for implementing solutions. The results demonstrated that the company reduced the product rejection rate by improving employee adherence to production procedures and conducting regular calibrations of measuring instruments. This research highlights the importance of lean manufacturing approaches in optimizing production processes and enhancing product quality in the feed industry.
Keywords:
Strategy, Lean Manufacturing, Livestock Feed Industry, Reject Product, WasteReferences
Al-Bakoosh, A. A., Ahmad, Z., & Idris, J. (2020). Implementation of the PDCA continuous improvement cycle (Plan-D0-Check-Act) as a tool for improving the quality of the cast AA5083 alloy produced in the foundry laboratory. IOP Conference Series: Materials Science and Engineering, 884(1). https://doi.org/10.1088/1757-899X/884/1/012114
Alkiayat, M. (2021). A Practical Guide to Creating a Pareto Chart as a Quality Improvement Tool. Global Journal on Quality and Safety in Healthcare, 4(2), 83–84. https://doi.org/10.36401/jqsh-21-x1
Amaral, V. P., Ferreira, A. C., & Ramos, B. (2022). Internal Logistics Process Improvement using PDCA: A Case Study in the Automotive Sector. Business Systems Research, 13(3), 100–115. https://doi.org/10.2478/bsrj-2022-0027
Araújo, A., Alves, A. C., & Romero, F. (2021). Barriers to Lean and Pull System implementation: a case study. IOP Conference Series: Materials Science and Engineering, 1193(1), 012048. https://doi.org/10.1088/1757-899X/1193/1/012048
Budiman, I., Tarigan, U. P. P., Mardhatillah, A., Sembiring, A. C., & Teddy, W. (2018). Developing business strategies using SWOT analysis in a color crackers industry. Journal of Physics: Conference Series, 1007(1). https://doi.org/10.1088/1742-6596/1007/1/012023
Buer, S. V., Semini, M., Strandhagen, J. O., & Sgarbossa, F. (2021). The complementary effect of lean manufacturing and digitalisation on operational performance. International Journal of Production Research, 59(7), 1976–1992. https://doi.org/10.1080/00207543.2020.1790684
Dhani, R., & Mayasari, A. (2022). Penerapan Prinsip Kaizen dalam Metode PDCA Sebagai Upaya Perbaikan Kualitas Produk Gentong. Jurnal Penelitian: Inovasi dan Pengelolaan Industri, 1(2). Retrieved from http://ejournal.unhasy.ac.id/index.php/invantrihttp://ejournal.unhasy.ac.id/index.php/invantri
Dumarya Manik, C., Susilo Wardani, E., Sunarsi, D., & Pamulang, U. (2020). The Effect of PDCA Cycle on Service Quality, Innovation Capability, and Work Performance of Indonesian Private Universities. PalArch’s Journal of Archeology of Egypt/Egyptology (PJAEE).
Germanova-Krasteva, D., & Dimcheva, I. (2020). Analysis of defects and their impact on the production losses using Pareto diagrams. E3S Web of Conferences, 207. https://doi.org/10.1051/e3sconf/202020703007
Hariadi, Bambang. (2005). Strategi Manajemen. Bayumedia Publishing.
Irfanto, R. (2022). The Analysis Cause Of Casting Repair Work With Pareto Chart In Project X. Jurnal Teknik Sipil, 18(1), 106–117. https://doi.org/10.28932/jts.v18i1.4485
Ishola, B. (2019). Handling waste in manufacturing: Encouraging re-manufacturing, recycling and re-using in United States of America. Procedia Manufacturing, 39, 721–726. https://doi.org/10.1016/j.promfg.2020.01.444
Isniah, S., Hardi Purba, H., & Debora, F. (2020). Plan do check action (PDCA) method: literature review and research issues. Jurnal Sistem Dan Manajemen Industri, 4(1), 72–81. https://doi.org/10.30656/jsmi.v4i1.2186
Kaneku-Orbegozo, J., Martinez-Palomino, J., Sotelo-Raffo, F., & Ramos-Palomino, E. (2019). Applying Lean Manufacturing Principles to reduce waste and improve process in a manufacturer: A research study in Peru. IOP Conference Series: Materials Science and Engineering, 689(1). https://doi.org/10.1088/1757-899X/689/1/012020
Kundu, G. K. (2015). Lean Wastes: Classifications From Different Industry Perspectives. ICTACT Journal on Management Studies, 01(01), 39–42. https://doi.org/10.21917/ijms.2015.0007
Kurniawan, C., Azwir, H. H., Ki, J., & Dewantara, H. (2018). Penerapan Metode PDCA untuk Menurunkan Tingkat Kerusakan Mesin pada Proses Produksi Penyalutan. In Journal of Industrial Engineering, Scientific Journal on Research and Application of Industrial System (Vol. 3, Issue 2). http://dx.doi.org/10.33021/jie.v3i2.526.g329
Liker, J.L. (1997). Becoming Lean. Productivity Press.
Lodgaard, E., & Aasland, K. E. (2011). An Examination Of The Application Of Plan-Do-Check-Act Cycle In Product Development. In International Conference On Engineering Design.
Martins, B., Silva, C., Silva, D., MacHado, L., Brás, M., Oliveira, R., Carvalho, T., Silva, V., & Lima, R. M. (2021). Implementation of a Pull System-A Case Study of a Polymeric Production System for the Automotive Industry. Management Systems in Production Engineering, 29(4), 253–259. https://doi.org/10.2478/mspe-2021-0031
Nguyen, V., Chau, C. K. B., & Tran, T. (2023). PDCA from Theory to Effective Applications: A Case Study of Design for Reducing Human Error in Assembly Process. Advances in Operations Research, 2023, 1–9. https://doi.org/10.1155/2023/8007474
Ohno, T., (1988). Toyota Production System: Beyond Large-Scale Production. Productivity Press.
Palange, A., & Dhatrak, P. (2021). Lean manufacturing a vital tool to enhance productivity in manufacturing. Materials Today: Proceedings, 46, 729–736. https://doi.org/10.1016/j.matpr.2020.12.193
Patel, P. M., & Deshpande, V. A. (2017). Application Of Plan-Do-Check-Act Cycle For Quality And Productivity Improvement-A Review. In Applied Sciences. https://doi.org/10.3390/app10186332
Puspasari, A., Mustomi, D., & Anggraeni, E. (2019). Proses Pengendalian Kualitas Produk Reject dalam Kualitas Kontrol Pada PT. Yasufuku Indonesia Bekasi. Widya Cipta, 3(1), 71–78. http://ejournal.bsi.ac.id/ejurnal/index.php/widyacipta
Realyvásquez-Vargas, A., Arredondo-Soto, K. C., Carrillo-Gutiérrez, T., & Ravelo, G. (2018). Applying the Plan-Do-Check-Act (PDCA) cycle to reduce the defects in the manufacturing industry. A case study. Applied Sciences (Switzerland), 8(11). https://doi.org/10.3390/app8112181
Santos, A. R. dos, Filho, F. de S. P., Almeida, F. M. de, Silva, M. J. P. G. da, & Sui-Qui, T. (2018). Innovating Management Control by Dynamic Analysis of Pareto in a Hotel Business. International Journal of Advanced Engineering Research and Science, 5(4), 197–206. https://doi.org/10.22161/ijaers.5.4.29
Senoaji, A. P., Kosasih, M., Nelfiyanti, N., & Puteri, R. A. M. (2020). Penerapan PDCA Dalam Meminimasi Defect Salah Varian Panel Dash Join Front Di PT.XYZ. JISI: Jurnal Integrasi Sistem Industri, 7(2), 81. https://doi.org/10.24853/jisi.7.2.81-90
Shokri, A. (2019). Reducing the Scrap Rate in Manufacturing SMEs through Lean Six Sigma Methodology: An Action Research. IEEE Engineering Management Review, 47(3), 104–117. https://doi.org/10.1109/EMR.2019.2931184
Silva, A. S., Medeiros, C. F., & Vieira, R. K. (2017). Cleaner Production and PDCA cycle: Practical application for reducing the Cans Loss Index in a beverage company. Journal of Cleaner Production, 150, 324–338. https://doi.org/10.1016/j.jclepro.2017.03.033
Silva, S., Sá, J. C., Silva, F. J. G., Ferreira, L. P., & Santos, G. (2020). Lean Green—The Importance of Integrating Environment into Lean Philosophy—A Case Study. Lecture Notes in Networks and Systems, 122, 211–219. https://doi.org/10.1007/978-3-030-41429-0_21
Statsenko, E., Omarov, R., Shlykov, S., Nesterenko, A., & Konieva, O. (2021). Pareto and Ishikawa Diagrams for Identifying the Causes of Defects in Poultry Meat. https://doi.org/10.14456/ITJEMAST.2021.241
Suhendi, D. H. Dan I. A. M. (2018). Perancangan Model Lean Manufacturing Untuk Mereduksi Biaya dan Meningkatkan Customer Perceived Value. In Jurnal Ilmiah Teknik Industri (Vol. 6, Issue 1). https://doi.org/10.24912/jitiuntar.v6i1.3023
Taj, S., & Berro, L. (2006). Application of constrained management and lean manufacturing in developing best practices for productivity improvement in an auto-assembly plant. International Journal of Productivity and Performance Management, 55(3–4), 332–345. https://doi.org/10.1108/17410400610653264
Taufik, D. A. (2020). PDCA Cycle Method implementation in Industries: A Systematic Literature Review. In IJIEM (Indonesian Journal of Industrial Engineering & Management) (Vol. 1). Retrieved from http://publikasi.mercubuana.ac.id/index.php/ijiem
Venkat Jayanth, B., Prathap, P., Sivaraman, P., Yogesh, S., & Madhu, S. (2020). Implementation of lean manufacturing in electronics industry. Materials Today: Proceedings, 33, 23–28. https://doi.org/10.1016/j.matpr.2020.02.718
Womack, J.; D. Jones; and D. Roos (1990). The Machine that Changed the World – The History of Lean Production. Harper Perennial.
